Pair a Bluetooth Low Energy Cadence Sensor

Related links:
Troubleshooting Your Sensors

Android Support for Cadence Sensors now Released!!

Fitdigits apps iCardio, iRunner, iWalker and iBiker are compatible with the Wahoo RPM Cadence Sensor and other Bluetooth Low Energy compatible cadence sensors like Bryton, Polar, CycleOps and more. Now you can use the sensor to accurately track your Spinning / Indoor Cycling cadence, or use the sensor to track a bike ride while using GPS to track speed and distance. You must have a Bluetooth Smart compatible device to pair.

    1. Install your Cadence Sensor on your bike or Spinning Bike
    2. Push the pedals in order to activate the sensor
    3. Open the Fitdigits app and go to Menu > Sensors
    4. Scroll down to “Cadence” hit the + button
    5. The app should scan and find the active cadence sensor. Tap OK to pair

You are now paired! Begin a Spinning or Bike workout to get real time cadence. Check out DC Rainmaker’s post on “How to get and record cadence information on a spin or gym bike” for tips on how to utilize the RPM Cadence Sensor on a bike – pretty cool stuff.

Pair Your Bluetooth Low Energy Speed & Cadence Sensor

Related links:
Troubleshooting Your Sensors

Fitdigits iOS apps are compatible with the Wahoo Blue Speed and Cadence Sensor, the Scosche Speed/Cadence sensor, and other Bluetooth Low Energy (BLE / BT 4.0 / BT Smart) Speed and Cadence sensors.

Pair a Speed & Cadence Sensor

1. Install your Speed and Cadence Sensor on to your Outdoor Bike

Speed + Cadence pairing

Tap Bluetooth Smart ON under Speed + Cadence to pair

2. Open your Fitdigits app and go to Menu > Sensors, and scroll down to Speed + Cadence.

3. Move the pedals on your Bike with the installed sensor. This will turn on the sensor

4. Turn Bluetooth Smart under Speed + Cadence to ON. It will now search for the sensors

5. It will find the sensor and assign a sensor ID.

 

Calibrate the Speed & Cadence Sensor

 

Calibrate your Speed and Cadence Sensor with GPS, similar to the way you calibrate a foot pod. Once you have the sensor installed and paired, tap Menu > Sensors, and under Speed + Cadence tap Calibration (Note: this will only appear if S+C is turned on).

On the cycle calibration page, the process is the same as calibrating a foot pod. Enter in your Calibration factor, and all bike workouts will now use this calibration factor during workouts.